No products
We strive to maintain our inventory to meet the demand for our products and normally ship within two business days, however at times we get large orders that require all of our available inventory resulting in a back-order status. If you would like to inquire about availability please call and we'll provide current inventory status. We apologize for this inconvenience and thank you for your business and patience, neither of which we take for granted.
Accessories - Official Manufacturer There are 53 products.
Subcategories
Accu-Shot Monopod...
Hardware
Here you will find other essential merchandise that B&T makes.
Atlas Bipod Accessories
We offer several accessories to provide for a variety of field conditions. Just like our other products, all accessories are constructed of the finest materials and built to the highest standards right here in the USA.
1913 Picatinny Rails...
BT19: Atlas Accuracy International Spigot
The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism. The evolution of long range shooting and shooter's demand drove subtle changes to the BT19. The...
$69.95In StockBT1517: Rail Mounting Fastener Set
The BT1517 Rail Mounting Fastener Set is used for mounting 1913 rails and consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. Sold as a pair. These T-nuts are commonly used by stock builders to accommodate the installation of sling studs and rails. They are typically bedded into the stock from the barrel channel side as...
$5.00In StockBT23: Atlas Ski Feet
The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only. NSN 1005-01-640-8881 Weight: 1.5 ounces Product will work on V8,...
$49.95In StockBT51: ACE Bracket
The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings....
$44.95In StockBT52: ACS/STR Picatinny Rail Adapter
The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found...
$39.95In StockBT53: SILO
The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups. One of the two flush cups is designed to accept...
$89.95In StockBT54: Flushcup Stud
The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only. Weight: 1 ounce
$14.95In StockBT56 LD: ¼-20 Adapter
The BT56 LD 1/4-20 Adapter is a novel solution to mount a Picatinny Rail lever mount to a Shooting / Walking / Camera Stick type monopod or Tripod supporting device that has a standard ¼-20 threaded stud. Once the BT56 LD is installed on your supporting device using the ¼-20 threaded hole found on the BT56 and is completed with a lever mount of your...
$17.95In StockBT56 LD-L: ¼-20 Lever Adapter
The BT56 LD-L ¼-20 Lever Adapter is a novel solution to mount a Picatinny Rail lever mount to a Shooting / Walking / Camera Stick type monopod or tripod supporting device that has a standard ¼-20 threaded stud. Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole found on the BT56 (included), your Picatinny Rail equipped...
$77.95In StockADM-5-H Lever
The ADM-5-H Lever base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. Has a two hole pattern of 1.100” and includes two 10-32 x 3/8" flathead socket screws. This lever is manufactured by American Defense...
$103.60In StockBT55: Atlas 5-H & Super CAL Rubber Feet
The BT55 Atlas 5-H and Super CAL Rubber Feet are standard equipment on all 5-H and Super CAL models of Atlas Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only. Weight: 2.185 ounces Product will work on 5-H and Super CAL models only.
$29.95In StockBT30-C: Coyote Brown Atlas Bipod Pouch
The BT30-C Coyote Brown Atlas Bipod Pouch accommodates all V8, Standard PSR and CAL model Atlas Bipods. They offer a pocket for the Atlas Leg Extensions and another for optional Atlas feet. It does NOT accept the 5-H, Super CAL or Tall PSR/CAL models. Made out of 1000 denier corder nylon. Also available in Ranger Green and Black. Weight: 7.9 ounces
$49.95In Stock
Follow Us