Atlas Bipods - Official Manufacturer There are 16 products.

Subcategories

  • V8 ATLAS Bipods

    The original Atlas Bipod, these are the bipods that brought the Patented Atlas traits of built in pan and cant along with the novel 45 degree leg positions to the market place.

  • PSR ATLAS Bipods

    The PSR (Precision Sniper Rifle) Atlas Bipod came about as the Atlas was selected for the USSOCOM Sniper Rifle system. The PSR was in response to the testing feedback that we got from the Military. These changes include a non-rotational legs, fore and aft pivot limiting bosses and a 40% stronger Inner leg.

  • 5-H ATLAS Bipods

    The 5-H Atlas Bipod is the culmination of everything that we have learned about making Bipods. Designed with and for the big bore shooter.

  • CAL Atlas Bipods

    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature.

  • Unassembled Atlas...

    For anyone that wishes to apply a finish to a new, unassembled B&T Atlas Bipod:

    Any new B&T Atlas Bipod that is going to have an aftermarket finish applied will ship unassembled for application of the finish.

    Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.

    Please note, we ship these parts with a sheet that shows the parts and quantities of each. This sheet should be used by ALL parties to verify ALL parts remain together throughout the process.

    B&T Industries L.L.C. does not sell or ship replacement parts. We do not ship parts to anyone other than the customer that is buying the product(s). B&T will not be held responsible for the aftermarket finish.

    NOTE: The Atlas Bipod is manufactured with close tolerances. The amount of finish applied can prevent proper assembly and affect functionality. Pay particular attention to the inner legs and around the ball holes on the outer legs when applying a finish. If the finish is applied too thick, it will negatively impact assembly and functionality. If we encounter a heavy finish, we will have to remove the necessary amount of finish in these areas to allow proper function.

per page
Showing 1 - 12 of 16 items
  • Quick view
    $279.95 In Stock

    The BT47-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19...

    $279.95
    In Stock
  • Quick view
    $339.95 In Stock

    The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR...

    $339.95
    In Stock
  • Quick view
    $259.95 In Stock

    The BT46-NC PSR (Precision Sniper Rifle) Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT46-NC will also mount directly our BT19 AI...

    $259.95
    In Stock
  • Quick view
    $319.95 In Stock

    The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The BT46-LW17...

    $319.95
    In Stock
  • Quick view
    $279.95 In Stock

    The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. Height Range: 5–9" Preloaded Pan: 30 degrees Preloaded Cant: 30 degrees Position Button...

    $279.95
    In Stock
  • Quick view
    $219.95 In Stock

    The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 AI Spigot. It is comprised...

    $219.95
    In Stock
  • Quick view
    $219.95 In Stock

    The BT10 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Selected for SOCOM MK14 MOD 2. NSN 1005-01-601-000. Available in black only. Height Range: 5–9" Preloaded...

    $219.95
    In Stock
  • Quick view
    $70.00 In Stock

    For anyone that wishes to apply a finish to a currently owned B&T Atlas Bipod: When applying an aftermarket finish that requires the use of heat or disassembly to any B&T Atlas Bipod, we respectfully ask that you send that product to us so we can properly disassemble and return all appropriate parts to you for application of the finish. Once the...

    $70.00
    In Stock
  • Quick view
    $389.95 In Stock

    Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features.  The BT35-NC 5-H Atlas Bipod "No Clamp" has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires the...

    $389.95
    In Stock
  • Quick view
    $449.95 In Stock

    Since B&T Industries introduced the Atlas Bipod in 2006, the shooting community found a usefulness in its patented, novel features. We began receiving requests for a "bigger," "heavier," "stouter" bipod with the same features.  The BT35-LW17 5-H Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM 4103LA74 5-H Lever. It is...

    $449.95
    In Stock
  • Quick view
    $239.95 In Stock

    The CAL (Cant And Loc) Atlas Bipods were developed for shooters that do not desire the Panning feature. The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black...

    $239.95
    In Stock
  • Quick view
    $239.95 In Stock

    The BT65-NC CAL (Cant And Loc) Atlas Bipod “No Clamp” model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size ”Lever Mount” to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT65-NC will also mount directly to our BT19 AI Spigot. It...

    $239.95
    In Stock
Showing 1 - 12 of 16 items