BLEMISHED - Official Manufacturer

The products below are all units that while 100% functional, did not meet our high quality control standards. While the reasons for being cosmetically blemished will vary each unit is 100% functional and ready to go into service. Blemished products are not available un-assembled.

BLEMISHED - Official Manufacturer There are 12 products.

Showing 1 - 12 of 12 items
  • Quick view
    $186.96 $219.95 -15% In Stock

    The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 (AI) and BT21 (TRG)...

    $186.96 $219.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $21.21 $24.95 -15% In Stock

    The BT34 - 2.05" 1913 Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.  Machined to Picatinny rail standards from 6061-T6 aluminum with...

    $21.21 $24.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $76.46 $89.95 -15% In Stock

    The BT04-QK is our standard height Sling Stud Mount with QK01 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Elevation Range: 3.75 – 4.85” Folded Length: 3.95" Weight: 7.3 ouncesNOTICE: PART BT03 REQUIRED FOR USE...

    $76.46 $89.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $246.96 $290.54 -15% In Stock

    The BT10-LW17 V8 Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. Available in black only. The ADM-170-S is NOT blemished. Height Range: 4.75 – 9.0" approximately Preloaded Pan: 15...

    $246.96 $290.54 -15%
    Reduced price!
    In Stock
  • Quick view
    $80.71 $94.95 -15% In Stock

    The BT05-QK is our mid-height Sling Stud Mount with QK02 Quick Knob. Additional Thumbnut installed to LOCK the unit into a fixed elevation. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Elevation Range: 4.80 – 5.85" Folded Length: 4.95" approximate Weight: 8.2 ouncesNOTICE: PART BT03 REQUIRED FOR...

    $80.71 $94.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $80.71 $94.95 -15% In Stock

    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Elevation Range: 3.75 – 4.65” Folded Length: 3.85" approximate Weight: 7.4 ouncesHow to determine best size Accu-Shot...

    $80.71 $94.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $84.96 $99.95 -15% In Stock

    The BT13-Qk is our mid-height Precision Rail Monopod (PRM) with QK02 Quick Knob. Attaches to standard 1913 Picatinny rail. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only. Elevation Range: 4.75 – 5.65” Folded Length: 4.80" approximate Weight: 8.3 ouncesHow to determine best size Accu-Shot Precision...

    $84.96 $99.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $59.46 $69.95 -15% In Stock

    The BT19 Atlas Accuracy International Spigot (AAIS) is designed for use with any NC (No Clamp) style Atlas Bipod that mounts directly to the AAIS which plugs into the Accuracy International AI/AICS stocks utilizing the factory retention/release mechanism. The evolution of long range shooting and shooter's demand drove subtle changes to the BT19. The...

    $59.46 $69.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $69.95 $94.95 In Stock

    The Gen. 1 Folding Vertical Fore Grip offers two opposing flat surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap will reveal a storage compartment designed to hold a single 123 battery. The unique design protects the battery from being drained by placing the positive side (+) towards the relieved cap. When folded,...

    $69.95 $94.95
    Reduced price!
    In Stock
  • Quick view
    $38.21 $44.95 -15% In Stock

    The BT39 AI Monopod Bracket (AIMB) is an adapter required to attach the BT08-QK ASAI monopod (used with the original “legacy” AI style stocksides) to the new Accuracy International “Gen 2” style stocksides. It is machined from 4140 steel with a manganese phosphate finish. Modification to the Buttstock Stocksides (skins) is required to accept the BT39...

    $38.21 $44.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $33.96 $39.95 -15% In Stock

    The BT52 ACS/STR Picatinny Rail Adaptor for the popular Magpul ACS and STR style stocks provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your Magpul ACS and STR Stock. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized and steel. The two piece adaptor replaces the polymer insert found...

    $33.96 $39.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $76.46 $89.95 -15% In Stock

    The BT66 Atlas 5-H BAS Ski Feet are another example of us learning how our products are used and what end users want in order to get more out of our products. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H...

    $76.46 $89.95 -15%
    Reduced price!
    In Stock
Showing 1 - 12 of 12 items