BLEMISHED - Official Manufacturer

The Blemished Products below are units that did not pass our Quality Control due to cosmetic blemishes and/or surface deviations. Units remain 100% functional, ready to go into service and still carries our Lifetime Warranty Blemishes will vary between each unit and carry our blemished logo. Click here to view examples of Blemished Product.

BLEMISHED - Official Manufacturer There are 26 products.

per page
Showing 13 - 24 of 26 items
  • Quick view
    $127.46 $149.95 -15% In Stock

    The BT57-QK Accu-Shot Accuracy International AT (ASAIAT) Monopod is designed specifically to fit the Accuracy International Accuracy Tactical Rifle (AT) and Accuracy Tactical Accuracy International Chassis Systems (ATAICS). Also Known as the Gen. 2 stocks. It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black...

    $127.46 $149.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $16.96 $19.95 -15% In Stock

    The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). A standard sling stud and sling stud spacer can be used as one fastener or two button...

    $16.96 $19.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $25.46 $29.95 -15% In Stock

    The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). A standard sling stud and sling stud spacer or two button head machine screws can be used as a...

    $25.46 $29.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $46.71 $54.95 -15% In Stock

    The BT20 Atlas Accuracy International Spigot (AAIS) Rail Set consists of three pieces of 1913 rail that can be attached to the BT19 AAIS on the bottom and both sides. This accommodates for a multitude of options including the mounting of any rail mounted Atlas Bipod. Each rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec...

    $46.71 $54.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $21.21 $24.95 -15% In Stock

    The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod. It will also attach to many ARCA rail adaptors currently on the market with the same two hole pattern of 1.100” to the ARCA rail and accept...

    $21.21 $24.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $29.71 $34.95 -15% In Stock

    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picatinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles. The uniquely designed rectangle nuts (BT28-N) fit both Freeland and Anschutz...

    $29.71 $34.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $33.96 $39.95 -15% In Stock

    The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.6" between the holes. The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching...

    $33.96 $39.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $21.21 $24.95 -15% In Stock

    The BT34 - 2.05" 1913 Picatinny Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.  Machined to Picatinny rail standards from 6061-T6...

    $21.21 $24.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $21.21 $24.95 -15% In Stock

    The BT49 - 2.05" 1913 Adjustable Picatinny Rail has a center-to-center spacing of 1.2 - 1.6". Two machine screws can be used (not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. The BT49 can also be attached to a horizontal...

    $21.21 $24.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $25.46 $29.95 -15% In Stock

    The BT73 M-LOK® Rail is designed for use with all M-LOK® compatible hand guards, forends and buttstocks. It has 3 usable slots for attaching any of our 1913 Picatinny rail mounted Atlas Bipods, Accu-Shot Monopods or Folding Foregrip. It requires standard M-LOK® sized slots for mounting. Machined from 6061-T6 aluminum and Type III hard coat anodized. It...

    $25.46 $29.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $76.46 $89.95 -15% In Stock

    The BT53 SILO is a novel and patent product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 1000 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups. One Flushcup is designed to accept the novel BT54...

    $76.46 $89.95 -15%
    Reduced price!
    In Stock
  • Quick view
    $38.21 $44.95 -15% In Stock

    The BT51 ACE bracket was designed for the popular A.C.E. Skeleton Stock and provides the means to attach an Accu-Shot PRM style monopod (BT12-QK, BT13-QK and BT31-QK) to your A.C.E. Skeleton Stock. It is machined from 6061-T6 aluminum Mil-Spec Type III hard anodized. Besides the Picatinny rail for the PRM, the BT51 has two flush cups for attaching slings....

    $38.21 $44.95 -15%
    Reduced price!
    In Stock
Showing 13 - 24 of 26 items