No products
We strive to maintain our inventory to meet the demand for our products and normally ship within two business days, however at times we get large orders that require all of our available inventory resulting in a back-order status. If you would like to inquire about availability please call and we'll provide current inventory status. We apologize for this inconvenience and thank you for your business and patience, neither of which we take for granted.
Here you will find other essential merchandise that B&T makes.
Hardware There are 19 products.
Gen. 2 BT27: Folding Foregrip
When a member of a government agency asked us why the BT27 did not offer a 45 degree position, we did not have an answer. Now it does! The newly redesigned BT27 Folding Foregrip offers two opposing at surfaces to secure light switches with the installed Buna O-Rings. Removing the bottom cap reveals a storage compartment designed to hold a single 123...
$94.95In StockBT53: SILO
The BT53 SILO is a novel and patented product that attaches by means of a Picatinny rail. It provides a textured front that can be pressed into barricades, rubber side bars for “soft” side bracing and grip, 600 denier cordura "bean-bag" bottom for “soft” interface on ledges, windows etc. and two flush cups. One of the two flush cups is designed to accept...
$89.95In StockBT54: Flushcup Stud
The BT54 Flushcup Stud is a novel means to quickly install, move or remove accessories to a Picatinny rail, IF the accessory has a corresponding flushcup hole that aligns with the slots of the Picatinny rail. The BT54 was conceived and designed for use with our BT53 SILO. Available in black only. Weight: 1 ounce
$14.95In StockADM-170-S: Atlas Accessory
The ADM-170-S base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. Has a two hole pattern of 1.100” and includes two 10-32 x 3/8" flathead socket screws. This lever is manufactured by American Defense...
$93.60In StockADM-5-H Lever
The ADM-5-H Lever base is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems. Has a two hole pattern of 1.100” and includes two 10-32 x 3/8" flathead socket screws. This lever is manufactured by American Defense...
$103.60In StockBT43: Leveraged Rail
The BT43 Leveraged Rail is our BT20-B and American Defense Manufacturing's ADM-170-S lever as a complete assembly. It provides the means to quickly attach/detach any rail attached accessory. This is a direct, quick detach solution for our two-screw mount Atlas Bipods (BT10, BT65, BT69, BT72) and PRM Accu-Shot Monopods (BT12, BT13, BT31). The BT20-B is...
$84.95In StockBT56 LD: ¼-20 Adapter
The BT56 LD 1/4-20 Adapter is a novel solution to mount a Picatinny Rail lever mount to a Shooting / Walking / Camera Stick type monopod or Tripod supporting device that has a standard ¼-20 threaded stud. Once the BT56 LD is installed on your supporting device using the ¼-20 threaded hole found on the BT56 and is completed with a lever mount of your...
$17.95In StockBT56 LD-L: ¼-20 Lever Adapter
The BT56 LD-L ¼-20 Lever Adapter is a novel solution to mount a Picatinny Rail lever mount to a Shooting / Walking / Camera Stick type monopod or tripod supporting device that has a standard ¼-20 threaded stud. Once the BT56 LD-L is installed on your supporting device using the ¼-20 threaded hole found on the BT56 (included), your Picatinny Rail equipped...
$77.95In StockBT14: Magpul PRS Threaded Sling Studs
The BT14 Magpul PRS Threaded Sling Studs replace one of the four Socket Button Head Cap Screws found on the Magpul Gen 1 Precision Rifle Stock (PRS) with a sling stud. The threaded straps that come standard with the PRS can be reversed giving a total of 8 choices for stud placement. Each BT14 comes with two Sling Studs having 10-24 threads and black...
$5.00In StockBT6569ML / BT6569ML-NC: Atlas CAL Upgrade...
The BT6569ML and BT6569ML-NC are current production CAL mounts that provide 63 degrees of Cant. Additional Cant is considered an upgrade (see illustrations to determine which mount you have). The additional degrees of Cant was requested by a member of the SOF community and longtime user of B&T products. The BT6569ML Mount is the standard two-screw...
$29.95In StockBT70: Atlas M-LOK® Adapter
The BT70 Atlas M-LOK® Adapter is an interface between all Atlas Bipods with the “NC” designator in their names (BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC, BT72-NC) and M-LOK style mounting systems. It requires two (2) M-LOK standard sized slots for mounting. Machined from 6061-T6 aluminum and Type III hard coat anodized and comes with two 3/8...
$29.95In StockArea 419 ARCALOCK Clamp
The ARCALOCK Clamp will bolt directly to any "NC" (No Clamp) style of Atlas Bipods (except the 5-H, see ARCALOCK Spigot Extension). It has a two hole pattern of 1.100”. It will also bolt directly to our BT20-B Bottom Picatinny Rail to utilize the quick detach lever on our "LW17" style of Atlas Bipods OR the 2-screw mount style of Atlas Bipods.The ARCALOCK...
$85.00In Stock
Follow Us