No products
We strive to maintain our inventory to meet the demand for our products and normally ship within two business days, however at times we get large orders that require all of our available inventory resulting in a back-order status. If you would like to inquire about availability please call and we'll provide current inventory status. We apologize for this inconvenience and thank you for your business and patience, neither of which we take for granted.
We offer several accessories to provide for a variety of field conditions. Just like our other products, all accessories are constructed of the finest materials and built to the highest standards right here in the USA.
Atlas Bipod Accessories There are 33 products.
BT22: Atlas Leg Extensions
The BT22 Atlas Leg Extensions are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They provide an additional 3 inches of elevation and accept any of our optional V8, PSR or CAL feet. Sold as a pair. Available in black only. NSN 1005-01-641-0369 Weight: 1.8 ounces Product will work on V8, PSR and CAL...
$49.95In StockBT32: Atlas Standard Rubber Feet
The BT32 Atlas Standard Rubber Feet are standard equipment on all V8, PSR or CAL model Atlas Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only. Weight: 1.0 ounce
$19.95In StockBT23: Atlas Ski Feet
The BT23 Atlas Ski Feet are easily installed to any V8, PSR or CAL model Atlas Bipod with the press of a stainless steel plunger. They will lay flat in the 90 degree position only. The BT23 deliver a fully articulated smooth foot to support the bipod. Sold as a pair. Available in black only. NSN 1005-01-640-8881 Weight: 1.5 ounces Product will work on V8,...
$49.95In StockBT74: Atlas Raider Cleat Feet
The BT74 Atlas Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit V8, PSR and CAL model Atlas Bipods, as well as adaptors that use our feet. Easily installed with the press of a stainless steel plunger. The Cleat portion is approximately 1.000” long with the largest outer diameter of...
$69.95In StockBT55: Atlas 5-H & Super CAL Rubber Feet
The BT55 Atlas 5-H and Super CAL Rubber Feet are standard equipment on all 5-H and Super CAL models of Atlas Bipods. They are easily installed with the press of a stainless steel plunger. Sold as a pair. Available in black only. Weight: 2.185 ounces Product will work on 5-H and Super CAL models only.
$29.95In StockBT66: Atlas 5-H & Super CAL BAS Ski Feet
The BT66 Atlas 5-H and Super CAL BAS Ski Feet were developed from listening to customer feedback. Starting with 3.5" 6061-T6 bar stock, these monsters are made to slide in both the 90 and 45 degree leg positions. They are easily installed with the press of a stainless steel plunger to the 5-H and Super CAL models of Atlas Bipod. Sold as a pair. Weight:...
$89.95In StockBT75: Atlas 5-H & Super CAL Raider Cleat Feet
The BT75 Atlas 5-H & Super CAL Raider Cleat Feet are turned from 303 Stainless Steel bar stock in one piece for strength and durability. They will fit 5-H and Super CAL model Atlas Bipods. Easily installed with the press of a stainless steel plunger. The Cleat portion is approximately 1.225” long with the largest outer diameter of approximately...
$84.95In StockBT15: 3.35" 1913 Picatinny Rail
The BT15 - 3.35" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). A standard sling stud and sling stud spacer can be used as one fastener or two button...
$19.95In StockBT17: 4" 1913 Picatinny Rail
The BT17 - 4" 1913 Picatinny Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. It also has a flush cup allowing the use of Flush Cup sling swivels and sling studs (neither provided). A standard sling stud and sling stud spacer or two button head machine screws can be used as a...
$29.95In StockBT20: Atlas Accuracy International Spigot...
The BT20 Atlas Accuracy International Spigot (AAIS) Rail Set consists of three pieces of 1913 rail that can be attached to the BT19 AAIS on the bottom and both sides. This accommodates for a multitude of options including the mounting of any rail mounted Atlas Bipod. Each rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec...
$54.95In StockBT20-B: Atlas Accuracy International...
The BT20-B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod. It is the same rail found on our BT43 Leveraged Rail and BT20-B/ARCALOCK Clamp. It will also attach to many ARCA rail adaptors currently on...
$24.95In StockBT33: Tube Rail Kit
The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.6" between the holes. The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching...
$39.95In Stock
Follow Us