1913 Picatinny Rails There are 18 products.

per page
Showing 1 - 12 of 18 items
  • Quick view
    $19.95 In Stock

    The BT15 - 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of...

    $19.95
    In Stock
  • Quick view
    $5.00 In Stock

    The BT1517 Rail Mounting Fastener Set is used for mounting 1913 rails and consists two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws. Sold as a pair. Weight: 0.4 ounces Designed, Engineered, Machined & Assembled in America.

    $5.00
    In Stock
  • Quick view
    $29.95 In Stock

    The BT17 - 4" 1913 Rail will accommodate hole patterns with a center to center spacing of 2.2 – 3.5" with a FLAT back to accommodate flat surfaces. A standard sling stud and sling stud spacer or two button head machine screws can be used as a fastener. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks....

    $29.95
    In Stock
  • Quick view
    $54.95 In Stock

    The BT20 Atlas Accuracy International Spigot (AAIS) Rail Set consists of three pieces of 1913 rail that can be attached to the BT19 AAIS on the bottom and both sides. This accommodates for a multitude of options including the mounting of any rail mounted Atlas Bipod. Each rail is machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec...

    $54.95
    In Stock
  • Quick view
    $24.95 In Stock

    The BT20B Atlas Accuracy International Spigot Bottom Rail is the same rail found in the BT20, but consists of the bottom 1913 rail ONLY. It attaches to the BT19 AAIS on the bottom and accepts any rail mounted bipod. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type III Class 2 finish. Available in black only.  Length: 1.60"...

    $24.95
    In Stock
  • Quick view
    $49.95 In Stock

    The BT21 Atlas TRG Bracket (ATB) is designed for use with the Sako TRG line of rifles utilizing the TRG bipod attachment slot. The ATB provides a forward mounting position which is also closer to the bore-line. It is designed for use with either the BT10, BT10-LW17, BT35-LW17, BT65 or BT65-LW17 Atlas Bipods, which would mount directly to the Picatinny...

    $49.95
    In Stock
  • Quick view
    $34.95 In Stock

    The BT26 CAR Adaptor installed on your CAR collapsible stock allows any of our PRM style monopods to be installed. This is a great option for shooters that want the LOP adjustments available with a collapsible stocks, but want the stability provided by the Accu-Shot. The BT26 replaces the factory loop on the stock while providing the means to re-attach...

    $34.95
    In Stock
  • Quick view
    $34.95 In Stock

    The BT28 AFAR Rail Kit will mount into accessory rails and provide a low profile 1913 Picitinny rail for attaching the Atlas Bipods or other accessories. This is a great option for shooters that have accessory rails and want to use their rail mounted Atlas on several rifles. Machined to Picatinny rail standards from 6061-T6 aluminum with Mil-Spec Type...

    $34.95
    In Stock
  • Quick view
    $10.00 In Stock

    The BT28-N AFAR Rail Nuts are replacement nuts for the BT28 AFAR Rail Kit. 4041 Alloy Steel fasteners. Sold as a pair. Weight: 0.22 ounces Designed, Engineered, Machined & Assembled in America.

    $10.00
    In Stock
  • Quick view
    $34.95 In Stock

    The BT29 Sako TRG Rail Kit comes complete and ready to install onto your TRG stock. The kit allows for the installation of the BT12-QK Accu-Shot Precision Rail Monopod (BT12-QK is shown but not included). It is machined from 6061-T6 aluminum that is Mil-Spec Type III hard anodized. Available in black only.  Weight: 1.15 ounces Installation of the BT29...

    $34.95
    In Stock
  • Quick view
    $39.95 In Stock

    The BT33 Tube Rail Kit consists of a Steel Bar Nut, designed to fit inside free float tubes, and a low profile 1913 Picatinny rail 2.05" long with a 1.00" radius back and a center-to-center spacing of 1.602 between the holes. The BT33 is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the...

    $39.95
    In Stock
  • Quick view
    $24.95 In Stock

    The BT34 - 2.05" 1913 Rail has a center to center spacing of 1.6". Two machine screws can be used not included, see BT1517) to attach this rail to the forearm of standard rifle stocks. It can also be attached to a horizontal surface on the Butt section to attach our Precision Rail Monopods.  Machined to Picatinny rail standards from 6061-T6 aluminum with...

    $24.95
    In Stock
Showing 1 - 12 of 18 items