BLEMISHED BT69-NC Gen.2 CAL Atlas Bipod: Tall No Clamp*

New product

The BT69-NC Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with 10/32 threads. It accepts any 17S size lever style mount such as the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any ARCA dovetail mount with the same hole pattern. The BT47-NC will also mount directly to our BT19 AI Spigot or BT70 M-LOK® Adapter.

It is comprised of 6061-T6 aluminum, except the inner legs which are made from 7075-T6 aluminum, Mil-Spec Type III hard coat anodized and have heat treated stainless steel components. We chose to support a legend in the shooting sports by using the original KMW “Pod-Loc™.” Read how to adjust the Pod-Loc™ lever below.

  • Height Range: 6-12.25” (8.11” at 90°)
  • Cant: 30 degrees
  • Position Button 0.5" diameter
  • 5 leg positions: 0, 45, 90, 135 & 180°
  • Non-Rotating Legs: outer leg does not rotate around inner leg
  • Larger, stronger inner legs
  • Weight: 14.2 ounces
  • Footprint: 9.25-16.5”

More details

$220.96

-15%

$259.95

More info

*To make your Blemished BT69-NC a BT69-LW17 (with a quick detach lever), add an ADM-170-S Lever to your cart. They are not blemished and sold at full retail price. If added to your cart, we will install the lever onto the bipod in your cart unless otherwise specified in the "Comments" section. 

Using the KMW "Pod-Loc™"

With the CAL bipod mounted to your rifle, you will be able to lock and un-lock the canting motion by rotating the Pod-Loc™ lever. Turn clockwise to lock and counter clockwise to un-lock. The Pod-Loc™ lever position can be adjusted for positioning by pulling the lever directly away from the body of the CAL and rotating to desired position. This positioning can be repeated until optimal position is achieved.

More Information & Accessories

  • NCNClamp
  • Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions
  • Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions.
  • Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of five positions ¾” apart
  • Optional 3” Leg Extensions to increase height
  • Standard soft, durable Rubber feet that are suitable for many surfaces
  • Optional interchangeable SkiSpikeCleat and Spiked Cleat feet easily swapped in the field with the press of a stainless steel plunger with a bullet tip
  • Optional mounting systems available for Accuracy International rifles

Customers who bought this product also bought: