BT47-LW17 PSR Atlas Bipod: Tall with ADM 170-S Lever View larger

U-BT47-LW17 PSR Atlas Bipod: Tall with Quick Detach Lever - Unassembled

New product

Ships unassembled for coating.

The BT47-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. The PSR series of Atlas Bipods were developed for the SOCOM PSR (Precision Sniper Rifle) Weapons System (BT46-LW17 was selected for SOCOM PSR).

  • Height Range: 7–13"
  • Preloaded Pan: 30 degrees
  • Preloaded Cant: 30 degrees
  • Fore and Aft pivot limiting Bosses
  • 5 leg positions: 0, 45, 90, 135 & 180 degrees
  • Non-Rotating Legs: outer leg does not rotate around inner leg
  • Larger, stronger inner legs
  • Weight: 15.13 ounces approx.
  • Footprint: 10-14.5"

More details

$374.95

More info

Unassembled & Coating Process Information

For anyone that wishes to apply a finish to a new, unassembled B&T Atlas Bipod:

Any new B&T Atlas Bipod that is going to have an aftermarket finish applied will ship unassembled for application of the finish.

Once the finish is applied and the parts are returned to B&T, we will reassemble them to our specifications and ship it back to you. Please ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.

Please note, we ship these parts with a sheet that shows the parts and quantities of each. This sheet should be used by ALL parties to verify ALL parts remain together throughout the process.

B&T Industries L.L.C. does not sell or ship replacement parts. We do not ship parts to anyone other than the customer that is buying the product(s). B&T will not be held responsible for the aftermarket finish.

NOTE: The Atlas Bipod is manufactured with close tolerances. The amount of finish applied can prevent proper assembly and affect functionality. Pay particular attention to the inner legs and around the ball holes on the outer legs when applying a finish. If the finish is applied too thick, it will negatively impact assembly and functionality. If we encounter a heavy finish, we will have to remove the necessary amount of finish in these areas to allow proper function.

More Information

  • LW17Lever Mount With ARMS 17S Mount; How to function the ADM Mount
  • UHMW components used for smooth tracking
  • Preload on Pan and Cant can be tightened by means of the knurled knob
  • Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount
  • Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions
  • Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions.
  • Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of five positions ¾” apart
  • Optional 3” Leg Extensions to increase height
  • Standard soft, durable Rubber feet that are suitable for many surfaces
  • Optional interchangeable SkiSpikeCleat and Spiked Cleat feet easily swapped in the field with the press of a stainless steel plunger with a bullet tip
  • Optional mounting systems available for Accuracy International and Sako rifles

ADM-170-S Lever Adjustment & Operation

Customers who bought this product also bought: