BT10-NC V8 Atlas Bipod View larger

U-BT10-NC V8 Atlas Bipod: No Clamp - Unassembled

New product

Ships unassembled for coating.

The BT10-NC V8 Atlas Bipod "No Clamp" model has a two hole pattern of 1.100” with the holes being 10/32 threads. It requires any 17S size lever style mount to include the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271 or any Arca dovetail mount with the same hole pattern. The BT10-NC will also mount directly to our BT19 (AI) and BT21 (TRG) spigots. 

It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.

  • Height Range: 5–9"
  • Preloaded Pan: 30 degrees
  • Preloaded Cant: 30 degrees
  • 5 leg positions: 0, 45, 90, 135 & 180 degrees
  • Weight: 10.8 ounces approx.
  • Footprint: 8–11"

More details

$254.95

More info

Unassembled & Coating Process Information

Process for anyone wanting to apply an aftermarket finish to a new, unassembled B&T product:

  1. Appropriate parts ship unassembled direct to customer.
  2. Customer confirms proper parts are received and initials Inventory Form.
  3. Coating is completed to customers satisfaction.
  4. Customer returns coated parts and Inventory Form to B&T.
  5. B&T assembles them to specifications for quality assurance.
  6. Completed unit is shipped back to customer.

PLEASE NOTE: It is the customers responsibility to notify us within two days of receipt of any missing parts. It is also the customers responsibility to verify coating is to their satisfaction and that ALL parts are returned to B&T for assembly. Any masking materials/residue must be removed prior to parts return, otherwise a $30.00 cleanup charge will be applied.

Important Notes for Success of this Procedure:

  1. Parts should be returned within 45 days to ensure compatibility with current production.
  2. Ensure parts are packaged appropriately to avoid any damage in transit. B&T will not be responsible for the finish or any damage to the finish.
  3. We ship the parts with an Inventory Form that shows the appropriate parts and quantities of each. This form should be used by ALL parties to verify ALL parts remain together throughout the process and is returned to B&T with the coated parts.
  4. The Atlas Bipod is manufactured with close tolerances. Any excess finish applied may negatively affect proper assembly and functionality. In this case, the excess finish will be removed to allow proper function. Pay particular attention to the “through holes” found on the Inner and Outer Legs.
  5. We do not sell or ship replacement parts and we do not ship parts to anyone other than the customer that is buying the product(s). B&T will not be held responsible for the aftermarket finish.

More Information

  • NCNClamp
  • UHMW components used for smooth tracking
  • Preload on Pan and Cant can be tightened by means of the knurled knob
  • Picatinny Rail Mount interface by either standard machine screw fastener based clamp or optional ARMS 17S lever mount
  • Independent, intentional and non-orientated leg positioning allows either hand to move leg into any of the five leg positions
  • Solid leg positions allows shooter to load the bipod at the 45 and 90 degree positions.
  • Non-orientated leg length adjustment done by either hand: Outer leg slides on the Inner leg locating on any of five positions ¾” apart
  • Optional 3” Leg Extensions to increase height
  • Standard soft, durable Rubber feet that are suitable for many surfaces
  • Optional interchangeable SkiSpikeCleat and Spiked Cleat feet easily swapped in the field with the press of a stainless steel plunger with a bullet tip
  • Optional mounting systems available for Accuracy International and Sako rifles

BT10-NC to BT10-LW17 with Quick Detach Lever

  • To make your Unassembled BT10-NC an Unassembled BT10-LW17 with the quick detach lever, purchase an Unassembled BT10-LW17 instead.